For '84-94 stock size Corvette bodies with an extended wheel base of 104". You must assemble the chassis inside the body because it needs to fit as tight as possible to the body shell. Use with our Eliminator II 4-link and eye mount VariStruts or Strange strut front suspension. Ground clearance is 3-1/2" at the 4-link crossmember and 3-1/2" at the front crossmember. The front and rear frame rails join at the main hoop crossmember allowing you to make the rear rails narrower, as little as 18" outside 4-link bracket width, for bigger tires. The roll cage assembly consists of 1-5/8x.134" wall and 1-1/4x.120" wall ERW tubing. Double frame rails in the center of the chassis increase rigidity for higher horse power applications. The kit includes a pair of front frame rails; a pair of rear frame rails; 1-5/8" main hoop crossmember; upper and lower strut mounts; tubular Pinto rack-and-pinion crossmember and mounts; complete roll cage assembly; coil-over upper shock mount with tabs and hardware; two engine mount loops; CAD drawing; and instructions. Due to sanctioning body rule changes, the purchaser takes all responsibility for assembling the chassis to meet the specific class you are running. We do not guarantee these parts to meet any specific class requirements. Funny car cage is optionally available.