EII M/S A-ARM 82-94 CORVETTE CHASSIS  E-mail this product to a friend

For '84-94 stock size Corvette bodies with an extended wheel base of 104". You must assemble the chassis inside the body because it needs to fit as tight as possible to the body shell. Use with our Eliminator II 4-link and tubular A-arm front suspension. Ground clearance is 3-1/2" at the 4-link crossmember and 3" at the firewall. The front and rear frame rails join at the main hoop crossmember allowing you to make the rear rails narrower, as little as 18" outside 4-link bracket width, for bigger tires. The roll cage assembly consists of 1-5/8x.134" wall and 1-1/4x.120" wall ERW tubing. Double frame rails in the center of the chassis increase rigidity for higher horse power applications. The kit includes a pair of front frame rails; a pair of rear frame rails; 1-5/8" round main hoop crossmember; upper and lower A-arm mounts; tubular Pinto rack-and-pinion crossmember and mounts; complete roll cage assembly; rear coil-over upper shock mount with tabs and hardware; one engine mount loop; CAD drawing; and instructions. Due to sanctioning body rule changes, the purchaser takes all responsibility for assembling the chassis to meet the specific class you are running. We do not guarantee these parts to meet any specific class requirements. Funny car cage is optionally available.

63163119691160