Unwelded FAB9 Rearend Housing (4130) with 3-1/2" Axle Tubes, 45.5" Wide  E-mail this product to a friend

The 16" wide center case is CNC laser cut, formed, robot welded and has a CNC machined center out of .188 4130 chrome moly steel. Housing fill sleeve and drain plug boss are factory welded in the center case. The 16" width allows the suspension brackets to be welded to the axle tubes as narrow as 20.5" outside width with a centered pinion, without modifying the brackets. The center case has internal axle tube gussets for added rigidity and axle tube stability. Axle tubes are made of 3-1/2x.250" 4130 tubing. The 3/8-24" 12-point 3rd member studs thread into the housing face from the inside. This weld-up kit will make a housing 45" wide with 1" of pinion offset to the passenger side.

Includes: Factory-welded center section with axle tubes installed; housing fill cap; magnetic drain plug with copper gasket; 12-point third-member studs; aircraft washers and locknuts.

Options: Tapered reinforcement back braces; choice of housing ends; and housing vent.

82242878287919818355