NOSTALGIA: 1937-41 WILLYS,STRUT,4-LINK,4130  E-mail this product to a friend

For '37-41 Willys coupe with an extended wheel base of 104". For best fit, assemble the main cage and rear frame rails inside the body. Use with our Battle Cruiser 4-link and eye mount VariStruts or Strange strut front suspension. Ground clearance is 5" at the 4-link crossmember and 3-1/2" at the front crossmember. Frame rails are made of 1-5/8" round tubing. The front and rear frame rails join at the main hoop crossmember allowing you to make the rear rails narrower, as little as 20" outside width, for bigger tires. The unique double frame rail design from the A-arm frame rail to the rear frame rail raise the driver area, while maintaining a low ride height for more aero dynamic body location. The roll cage assembly consists of 1-5/8x.083" wall; 1-5/8x.065" wall; and 1-1/4x.058" wall 4130 tubing. The kit includes a pair of front frame rails; a pair of rear frame rails; bent 1-5/8" round main hoop crossmember; upper strut mounts; lower control arm mounts; tubular Pinto rack-and-pinion crossmember and mounts; complete roll cage assembly; rear coil-over upper shock mount with tabs and hardware; two engine mount loops; CAD drawing; and instructions. Due to sanctioning body rule changes, the purchaser takes all responsibility for assembling the chassis to meet the specific class you are running in. We do not guarantee these parts to meet any specific class requirements. Funny car cage is optionally available.

66966919817081